Vnesite RPUS-L Slip-On Roll Prong
The type RPUS-L Slip-On Roll Prong is designed for Prongs up to ∅82mm 'Under Slung' from the Fork Tines and is suitable for fabric, cable and coil products. These attachments quickly adapt to Forklifts rated up to 2.5 Tonne requiring only the connection of the Safety Chain to prevent unintentional disengagement. Prongs are manufactured from high tensile steel and can be made to any length. The Safe Working Load (SWL) of this unit varies depending on Prong chosen.
• Safe Working Load (SWL) – refer chart below
• Unit Weight – refer chart below
• Point type as shown in diagram
• Standard finish – painted enamel
• Refer diagram below for all other specifications
Kraj izvora: Fujian, Kitajska (celina)
Blagovna znamka: HUAMAI
Model Number: RPUS - L60 - 1200
Product Name: Type RPUS-L Slip-On Roll Prong
Type: RPUS - L60 - 1200
"PL" (mm): 1200mm
SWL (kg): 800kg
Unit Weight (kg): 130kg
Load Centre (mm): 600mm
Hor C of G (mm): 350mm
The RPS Slip-On Roll Prong is suitable for fabric, cable and coil products. Can also be used for carpet handling, but usage is generally restricted to larger forklifts due to the extended load centre created by the length of the tines. These attachments quickly adapt to almost any forklift and require only the connection of a safety chain to prevent unintentional disengagement. Prongs are manufactured from high tensile steel and can be made to any length.
Type RPUS-H & RPUS-L Slip-on Roll Prongs are also available. The standard finish on all Roll Prongs is painted enamel. Please refer Diagram, Table & Specification sheets for full details.