A push-pull forklift attachment is a material handling device designed to move long and heavy loads with ease. It is attached to the forklift and helps in pushing and pulling large and heavy loads, making the movement of goods from one place to another much easier. This attachment is especially useful for handling long and narrow loads such as pipes, steel beams, and sheets.
The push-pull attachment is made up of two arms that are attached to the forklift's tines. These arms can be extended to accommodate the length of the load being transported. The arms also have rollers on their ends that make it easier to move the load. The rollers can be adjusted to the desired height, making it possible to transport loads of different heights and sizes.
This attachment is easy to install and operate. It can be easily attached to the forklift and removed when not in use. The arms can be extended or retracted to accommodate the size of the load being transported. The attachment also comes with hydraulic control valves that make it possible to control the speed and direction of the load.
The push-pull forklift attachment is ideal for handling long and narrow loads such as pipes, steel beams, and sheets. It reduces the risk of damage to the load and the environment, as it allows for precise control over the movement of the load. The attachment also helps to increase productivity by reducing the amount of time and effort required to transport the load.
In conclusion, the push-pull forklift attachment is a useful tool for transporting long and heavy loads. It makes material handling easier, reduces the risk of damage to the load and the environment, and increases productivity. This attachment is a must-have for any company that handles long and narrow loads.
Prednosti izdelka
HUMAI forklift push/ pull forklift attachment with China Xinchai C490 engine, hydraulic transmission,USA EATON hydraulic assisted steering valve,SHIMADZU oil pump,full suspension chassis.It is widely used to handing all kinds of goods,such as pallet,steel,brick etc.Shantui has cooperated with KOMATSU more than 30 years,all the product was made under KOMATSU standard.
Videoposnetki
Motor | Model | HUAMAI C490 | |
Nazivni rezultat | 40/2650 | Kw / min / min | |
Nazivni navor | 165/1800 | N · m / min / min | |
Št. Cilindra | 4 | ||
Bore × kap | 90 × 105 | mm | |
Izselitev | 2.7 | L | |
Dimenzije | Dvižna višina | 3000 | mm |
LxWxH (z / brez vilic) | 3779 (2709) x1226x2140 | mm | |
Polmer vrtenja | 2450 | mm | |
Kot nagiba droga (F / R) | 6/12 | Stopnja | |
Izvedba | Potovalna hitrost (polna obremenitev / brez obremenitve) | 19/20 | Km / h |
Hitrost dviganja (z / brez) bremena | 420/450 | mm / sek | |
Maks.izgradljivost | 20 | % | |
Lastna teža | 4560 | Kg | |
Kolesa in pnevmatike | Spredaj | 28 × 9-15-14PR | |
Zadaj | 6,50-10-10PR | ||
Medosna razdalja | 1700 | mm | |
Min.drtev v tleh (jambor) | 110 | mm |
Hitre podrobnosti
Stanje: Novo
Kraj izvora: Xiamen, Kitajska (celina)
Blagovna znamka: HUAMAI
Številka modela: HUAMAI30
Tip: Paletni viličar
Power Souce: dizelski motor
Nazivna nosilnost: 3000kg
Najv. Dvižna višina: 8000mm
Min. Dvižna višina: 3000 mm
Dolžina vilic: 1070mm
Širina vilic: 122 mm
Skupne dimenzije: 3829x1226x2140mm
Certifikacija: ISO9001 / ISO14001 / CE
Poprodajna storitev: Inženirji, ki so na voljo za servisiranje strojev v tujini
Acceseory: push / pull
Velikost vilic: 1070 * 122 * 40mm
Središče za tovor: 500 mm
Pnevmatika: Pnevmatika
Tip moči: Dizel
Barva: Rumena
Podstavek za kolesa: 1700 mm
Akumulator: 12V / 60Ah
Kapaciteta oljne posode: 50Liter
delovni tlak: 17,5Mpa